CAMWorks Tolerance Based Machining 2017.1 plugin for CAMWorks 2016-2017 | 22.4 MB
CAMWorks Tolerance Based Machining is a plug-in for CAMWorks 2016-2017 that allows you to calculate and automatically generate trajectories based on the information on dimensions and tolerances in the 3D model of a part based on the Machine to the Mean technology "(which can be translated as" Processing in the tolerance field " ).Using CAMWorks Tolerance Based Machining eliminates the common practice of "manual" calculation of tolerances in determining processing parameters or the need to rebuild elements of a 3D model, which ultimately saves programming time and speeds the transition from design to production
AIO Boot 0.9.4.1 PortableFile size
: 36.7 MB
AIO Boot is a handy utility that enables you to create a bootable USB or disk drive with Grub2 or Clover in a few simple steps. Additionally, it allows you to boot via LAN with PXE Server and iPXE Tiny, as well as integrate multiple operating systems or support programs. The program is not too difficult to use, and it features a simple, somewhat outdated interface. However, it must be noted that no English documentation is available.
Geometric DFMPro v4.2.1-4.4.1 for ProE WF/Creo-SSQ | 856 MB
DFMPro (Design For Manufacturbility Professional) is an easy-to-use tool for testing the manufacturability of parts and assemblies for designers and process engineers integrated in Pro / ENGINEER. Its use makes it easier to check the processability and identify parts of the project that can be labor-intensive or costly in manufacturing for turning, milling, turning and milling, sheet processing,Express analysis of the workability of the part in terms of the possibilities and principles of milling or turning is performed thanks to the DFMPro module. You simply select the type of part вЂ“ milling or turning вЂ“ and in a few seconds you will get a detailed report on possible processing problems. DFMPro will find all elements inaccessible to the cutter that do not correspond to the standards of the enterprise in relation to the depth / diameter ratio or by belonging to the standard range of hole diameters, rounding of the outer edges and trihedral internal corners, openings facing the outer faces not perpendicular to them or crossing internal cavities, and even Overestimated tolerance. For turning parts, grooves without fillets of internal diameter and all non-rounded circular edges will also be found. Numerical values вЂ‹вЂ‹of the criteria for manufacturability can be changed in a wide range in accordance with the requirements of the enterprise.